9
ORNAMENTAL FLUSH INSETS, GI-OI FIGURE 17
Assemble the flashing and mount to the inside of the outer shell using 4 securing screws and spacers (supplied) as shown. Hook the ornamental inlays over the spacers.
FIGURES15
UPPERLOWER
BAY GLASS FRONT, GI-BF
FIGURE 18
ORNAMENTAL BAY INSETS, GI-OI
FIGURE 19
With the bay chassis on a flat surface, insert the front glass (bottom first) and centred to the mitred edges of the chassis.
Fit the bevelled edge of the each side glass piece tightly to either edge of the front glass.
Secure the glass by bend- ing up the retainer tabs at the top and bottom.
Spread and insert the spring clips between the side glass and the chas- sis (2 per side).
Place the front brick panel pieces into place at the bottom.
RETAINER TAB
FIGURES16
SPRING CLIP
Both these options may be attached to the insert front using 4 magnets, posi- tioned as shown:
NOTE:The ornamental bay inlays can be adjusted to align with the bay door as- sembly.
FIGURE 20
MAGNET
Secure the bay to the insert front at the top and bottom outside corners using 4 screws.
BAY LOUVRES, GIB-L
Note: Black louvre assembly, if supplied, must be installed as uppers, due to the high fireplace temperature.
MAGNET
