7
LOG PLACEMENT
PHAZERTM logs and charcoal embers, exclusive to Napo- leon Fireplaces, provide a unique and realistic glowing effect that is different in every installation. Take the time to carefully position the charcoal embers for a maximum glow- ing effect.
POSITIONING THE LOGS IMPROPERLY WILL CAUSE
FLAME IMPINGEMENTAND CARBONING.
FIGURE 10
1.Place the front log onto the main burner, pushing it as close as possible to the burner ports without blocking/covering them. The left and right spacing between the log ends and the burner ports should be equal.
2.Place the back log onto the log support brackets located on the rear wall of the combustion chamber. The notch situated at the lower left of the back log should be centred evenly above the pilot assembly.
3.While supporting the back log, to prevent it from falling forward, set the three smaller logs into the pockets and grooves of the front and back logs, respectively.
Log colours may vary. During the initial use of the fire- place, the colours will become more uniform as colour pigments burn in during the heat activated curing proc- ess.
CHARCOAL EMBERS
Randomly place the embers along the front burner ports. Keep ember dust away from burner ports to avoid plugging them.
Fine dust found in bottom of bag not to be used. PHAZERTM logs and charcoal embers glow when exposed to direct flame. Use only certified PHAZERTM logs and char- coal embers available from your Napoleon dealer.
