Appendix B Default Settings
© National Instruments Corporation B-3 VXI-MXI-Express Series User Manual
Default Software Settings
The following hardware configurations are available through
Measurement& Automation Explorer (MAX).
Table B-1. VXI-MXI-Express Series Controller Hardware Default Settings
Jumper Description Setting
W2 SMB CLK10 DIR 1–2 In (Default)
2–3 Out
W3 External CLK10 Source Select 1–2 SMB (Default)
2–3 Trigger Card
W4 CLK10 Source Select 1–2 Internal Osc. (Default)
2–3 Exteranl Source
W5 MITE Configuration 1–2 Factory
2–3 User (Default)
W7 Trigger Card CLK10 Direction 1–2 Out
2–3 IN
W8 MITE Self Configuration 1–2 Disable
2–3 Enable (Default)
J2 Slot 0 Detect 1–2 Non-Slot 0
3–4 Auto Detect (Default)
5–6 Slot 0
Table B-2. MAX Device Tab Default Settings
Editor Field Default Setting
Device class Message-based
Number of handlers 1
Table B-3. MAX Shared Memory Tab Default Settings
Editor Field Default Setting
Don’t share memory
A24/A32 write posting Enabled