National Instruments WAP-3701, WAP-3711 Configuring TCP/IP-related Settings, Addressing, 3-10

NI WAP-3701/3711 User’s Manual		Web Console Configuration
TIP	If you want to back up or restore the configuration from a remote location over the Internet,
	adjust the Timeout and Max no. of retries settings of TFTP Server for remote TFTP

configuration backup/restore to succeed.

Resetting the Configuration to Factory Defaults

Clicking the Reset button resets the device configuration to factory defaults.

WARNING

Think twice before clicking the Reset button. Doing so will cause you to lose all of your current configuration settings.

Configuring TCP/IP-related Settings

Addressing

The IP address of the AP can be set manually (Set Manually) or automatically assigned by a DHCP server on the LAN (Obtain from a DHCP Server). If you are manually setting the IP address, Subnet mask, and Default gateway settings, set them appropriately, so that they comply with your LAN environment. In addition, you can specify the Host name and Domain (DNS suffix) of the NI WAP-3701/3711.

3-10