National Instruments WAP-3711, WAP-3701 Viewing Status, Save, Save & Restart, and Cancel Buttons

NI WAP-3701/3711 User’s Manual Web Console Configuration

Save, Save & Restart, and Cancel Buttons

There are three buttons at the bottom of each page for configuring settings—Save, Save & Restart, and Cancel. Clicking Save stores changes to the NI WAP-3701/3711’s memory and returns you to the home page. Clicking Save & Restart stores the changes to the NI WAP-3701/3711’s memory and restarts the NI WAP-3701/3711 to activate the new settings. Clicking Cancel discards any changes already made and returns you to the home page.

Note that if you click on Save, the home page will reflect the fact that the configuration settings have been changed by displaying two buttons—Restartand Cancel. In addition, changes are highlighted in red. Clicking Restart restarts the AP to activate the new settings. Clicking Cancel discards all of the changes.

Home and Refresh Buttons

At the bottom of each status page that shows read-only information, there are two buttons—Homeand Refresh. Clicking Home brings you back to the home page. Clicking Refresh updates the status information showing on the page.

Viewing Status

Associated Wireless Clients

On this page, the status information of each associated client, including its MAC address, IP address, user name (if the client has been IEEE 802.1X authenticated), number of bytes it has sent, number of bytes it has received, and the time of its last activity, is shown.

3-3