Appendix A - Specifications
Specifications | FISH 4500 |
| FISH 4600 | |
|
|
|
| |
Display type: | TFT Color |
| ||
Screen Resolution 320 high x 234 wide(pixels) | ||||
| CCFL |
| ||
|
|
| ||
Display size: | 5.0” (127mm) diagonal |
| 6.4” (163mm) diagonal | |
|
|
|
| |
Supply voltage: | 10.5 to 32 V DC |
| ||
|
|
| ||
Supply current at 13.8 V: | 400 mA min - no backlighting |
| 450 mA min - no backlighting | |
800 mA max - full backlighting |
| 850 mA max - full backlighting | ||
|
| |||
|
|
|
| |
Operating temperature: | 32° to 122°F (0° to 50°C) |
| ||
|
|
| ||
Environment: | IP67 |
| ||
|
|
| ||
Standards Compliance | USA FCC Part 15 Class B |
| ||
Europe (CE) | ||||
EMC: | New Zealand and Australia (C Tick) |
| ||
|
| |||
|
| |||
| 2 ft (0.6 m) to 2000 ft (600 m) with supplied transducer. | |||
Depth: | Depth capabilities depend on type of transducer used and installation and | |||
water clarity. Depth to 3300 ft (1000 m) may be achieved under optimal | ||||
| ||||
| conditions and using a 1000W dual element transducer. | |||
|
|
| ||
Output power: | Variable, up to 600 W RMS |
| ||
|
|
| ||
Dual Transducer frequency: | 200 kHz / 50 kHz |
| ||
|
|
| ||
Receiver sensitivity: | Better than 10 micro volts RMS |
| ||
Dynamic range 4.0 million to 1 (120 dB) | ||||
| ||||
|
|
|
| |
Typical depth acquisition | 2 seconds at 100 ft (30 m) |
| ||
time from startup: |
| |||
|
|
| ||
|
|
|
| |
Transom transducer cable | 33 ft (10 m) |
| ||
length: |
| |||
|
|
| ||
|
| |||
Temperature measurement | 32° to 99.9°F (0° to 37.7°C) Resolution of 0.1° unit | |||
range: |
|
|
| |
Speed range: | 1 to 50 kn (57.5 mph, 96.6 kph) |
| ||
|
|
| ||
Communications: | NMEA 0183 (Ver 2.0) 4800 baud |
| ||
NavBus |
| |||
|
| |||
|
|
| ||
NMEA Output: | DBT (Depth Below Transducer) |
| ||
DPT (Depth and Keel offset) |
| |||
NMEA (0183) is a standard |
| |||
VHW (Speed) |
| |||
for interfacing marine |
| |||
electronic devices. The | VLW (Distance traveled – Total & Trip) | |||
Navman fishfinder can output | MTW (Sea Water temperature) |
| ||
the following sentences | XDR (Battery voltage and fuel flow) |
| ||
|
| |||
|
| |||
| Outboard carbureted two stroke and EFI petrol/gasoline | |||
Fuel Computer: | engines: 30 to 300 hp |
| ||
Outboard four stroke petrol/gasoline engines: 90 to 300 hp | ||||
(optional fuel transducer(s) | ||||
Inboard petrol/gasoline engines: 50 to 300 hp | ||||
required) | ||||
Minimum flow rate: 1.3 U.S. gallons per hour (5 litres per hour) | ||||
| ||||
| Maximum flow rate: 34 U.S. gallons per hour (130 litres per hour) | |||
|
|
| ||
SmartCraft Support: | No |
| Yes | |
|
|
|
| |
32 | NAVMAN | FISH 4500/4600 Installation and Operation Manual |
