Displays, Sonar display, Display menu

5 The Displays

Press DISP to show the Display menu. Use or to select display tab, then select a particular display using the or cursor keys.

The Display menu is summarized here and each display is shown in the following sections.

Most displays have an Options menu so that relevant features can be changed quickly.

Note: Refer to Section 3-2 Setup > Sonar, for information about customizing features on the sonar displays.

Sonar display at a single or mixed frequency (section 5-1)

Sonar split display with zoomed section (section 5-2)

Sonar flat bottom trace in zoomed section (section 5-3)

Sonar split display with 50 and 200 frequencies (section 5-4)

Sonar split display with echo strength (section 5-5)

Fuel data (section 5-6)

Water temperature and depth history and boat data (section 5-7)

Product and wiring information (section 5-8)

Data header, set up to show the boat speed, water temp etc.

Depth (medium size digits)

Color bar

To show the Sonar display, press DISP and select Sonar Tab, se- lect Sonar and press ENT.

This display scrolls from right (most recent echoes) to left (oldest echoes) at the selected frequency (see section 3-2 Setup > Sonar).

To change items, press MENU until the Options menu is shown.

Gain is explained in section 4-4 Gain. Range is explained in section 4-5 Range. A-scopeis explained in section 5-5 Sonar A-Scope display.

Surface

Depth line

Fish symbols with depth

Bottom

Range

The data header can be selected on or off.

When selected, it is a customizable feature that can be used to display up to 12 data items, such as boat speed

or fuel used.

NAVMAN

FISH 4500/4600 Installation and Operation Manual