NEC 110 manual Battery Packs, Commands Descriptions Actions

Using the MH 110 Wireless Telephone 2-9

Table 2-5User Option Menu Commands

Commands	Descriptions	Actions
Ring Type	Select Telephone Ring to set	Press 0 to select desired ring
	the standard ring on the	type. The ring type currently set
	Wireless Telephone.	displays with an asterisk.
	• Normal: is the factory default
	ring.
	• Vib/Norm ring: vibrates for
	five seconds and then rings.
	• Vibrate ring: vibrates for a
	non-audible call alert.
Noise Mode	Adjusts the Wireless	Select an option that describes
	Telephone to account for	the noise in your environment.
	background noise.
	• Normal: for most office
	environments
	• High: for moderate
	background noise
	• Severe: for extremely noisy
	conditions.
Current IP address	In IP systems, the IP address	None.
	of the Wireless Telephone is
	displayed. This number may
	not be edited.
Extension	Sets the extension number	Use keypad to enter extension
	associated with your Wireless	number.
	Telephone. This number is
	used to identify the Wireless
	Telephone and is for display
	purposes only.

Additional options may be present. Contact your system administrator for information.

NOTE

Battery Packs

The Wireless Telephone’s Battery Pack must be recharged periodically. The Nickel Metal Hydride (NiMH) rechargeable Wireless Telephone Battery Pack gives you four hours of talk time or 80 hours of stand-by

time.

Stand-by time is when the phone is turned on, but not in an active call.

NOTE

Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1