3
Using the MH110 Desktop Charger
The MH110 Desktop Charger is designed to charge the Nickel Metal Hydride (NiMH) Battery Packs. Full charging is accomplished in approximately one and a half hours. Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.
The MH110 Desktop Charger is shipped with the appropriate power supply for the site's location. Place the MH110 Desktop Charger on a flat, horizontal surface. Plug the power supply into the MH110 Desktop Charger and into an appropriate wall outlet.
Do not place anything in the MH110 Desktop Charger other than the Wireless
Telephone. You might damage the contacts. Bent contacts can keep the Wireless
Telephone from charging.
CAUTION
Chapter Topics • Using the MH110 Desktop Charger
•Cleaning the MH110 Desktop Charger
•Important Notice
Using the MH110 Desktop Charger
Indicator Light
Charging Indicator
Charge Complete
The user must end any call in progress by pressing the Power Off/End Call button on the Wireless Telephone before placing the handset into the MH110 Desktop Charger. The Wireless Telephone may be off or in standby mode during charging.
Place the MH110 Wireless Telephone into the MH110 Desktop Charger slot facing forward. If the Wireless Telephone is placed correctly, the red indicator light will come on. The indicator light will not come on when the slot is empty, when the MH110 Wireless Telephone is improperly seated, or when the MH110 Desktop Charger has no power applied.
If the Wireless Telephone is in standby mode, it displays its extension number and Charging. . . . If the Wireless Telephone is turned off, only Charging. . . displays. The dots will be racing during the charging cycle. It is normal for the Battery Pack to become warm when charging.
Charge Complete displays when the Wireless Telephone is fully charged. The indicator light remains on until the Wireless Telephone is removed.
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
