NEC 110 manual Removing and Replacing the Battery Packs, Low Battery Indicator

2-10 Using the MH 110 Wireless Telephone

Low Battery Indicator

The low battery icon displays when the Wireless Telephone battery is running out of power. If the Wireless Telephone is in use, a soft beep also sounds through the earpiece every six seconds indicating that the user has 15-30 minutes of battery life remaining.

If the Wireless Telephone is not in a call when the battery begins to run out of power, only the low battery icon displays. If the battery is not recharged and becomes critically low, a Low Battery message displays and a loud beep sounds. The Wireless Telephone will not work until the Battery Pack is recharged.

Be careful not to short-circuit the battery contacts on the Battery Pack. Batteries can be short-circuited if metal objects such as coins, keys or paper clips cause a direct connection of the battery terminals. Shorting the contacts can cause permanent

CAUTION damage.

Removing and Replacing the Battery Packs

Use the following steps to remove and replace battery packs.

Step 1 Press down on the latch on the Battery Pack on the back of the Wireless

Telephone. The Battery Pack releases outward as shown in Figure 2-4.

Figure 2-4MH110 Wireless Telephone—back and left side view

UNIVERGE WL System Wireless Telephone (back and left side) with Battery Pack ajar

Up Select Down

Latch

Battery pack

Lip

Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1