Terminal Setup with the Feature KEY | NEC 2400IPX specs

TO ADJUST THE SPEAKER VOLUME

◆Press the ▲or▼

key during

speakerphone SPEAKER- - -

operation or engaged in a call.

TO ADJUST RINGER TONE

◆Press the ▲or▼ key during ringing.

RING - - - - - - - - - -

TO ADJUST LCD

CONTRAST

◆Press the ▲or▼ key in the on-hook

status.LCD- - - - - - - - - - - - - - -

TERMINAL SETUP WITH THE FEATURE KEY

MICROPHONE ON/OFF

LED on Mic key shows the status of the built-in microphone.

To change microphone status:

◆Press Soft Key associated with the MIC Display or press Feature and 1.

TO ADJUST INITIAL RECEIVING VOLUME

Handset receiver volume can be changed.

To change the handset receiver volume:

◆Press Feature and 2. The LCD displays the current volume status.

RCV VOL.

SMALL

(Time Display)

11

Image 13

NEC 2400IPX manual Terminal Setup with the Feature KEY, To change microphone status

Contents

Dterm NEC AMERICA, INC Table of Contents DND Do Not Disturb Keys and Lamps LCD Call Indicator Lamp Soft Keys Help Key Exit KeyMIC Microphone FDA Call Forwarding All Calls FDB Call Forwarding Busy Hold Call Hold CW Call WaitingPick Call Pickup Group Conf Three-way Calling SPD Speed Calling System CAS CAS Switch Hook FlashFlash Flash FDN Call Forward No Answer RLS Release Key Hset HeadsetGpick Call Pickup Group Enhancement Ckeep Eight-Party Conference Retrain Chcnf Call Hold Conference Terminal Setup with the UP/DOWN KEYDisplay Function Next Display Function Previous To change microphone status Terminal Setup with the Feature KEY Press Feature To set hands-free on To Originate AN Internal Call Multiline Appearance To Originate a Call Using Speed Calling ONE-TOUCH Buttons To Originate a Call Using Speed Calling INDIVIDUAL/GROUP Key To Originate a Call Using Speed Calling System Press Voice Speak to called party Voice Call Automatic Intercom To Answer a Voice Call HANDS-FREE Manual Intercom Press Dicm key Dial Intercom To Place a Call on Hold Press Hold twice To Place a Call on Exclusive Hold To Transfer a Call Conf Soft Key Conference To Establish a Broker Call Call PICK-UP Direct Call PICK-UP Group Calling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls Call Forwarding Busy Line To Cancel Forward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Option Do not DisturbPage Index Page Page DDD Callpark SET LCD Displays Forward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST LCDNOTE1 Face Layout DTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code