Manuals / NEC / Communications / Telephone

NEC 2400IPX manual Multiline Appearance, To Originate a Call Using Speed Calling ONE-TOUCH Buttons

Models: 2400IPX

1 55

Download 55 pages 24.94 Kb

Page 17

MULTILINE APPEARANCE

TO ORIGINATE

◆Press the MULTILINE APPEARANCE feature key.

◆Lift handset or press Speaker, receive Central Office or distant PBX dial tone.

◆Dial the destination.

TO ANSWER

◆Press the MULTILINE APPEARANCE feature key (ringing and flashing LED alert user to incoming call).

◆Lift handset or press Speaker.

◆Speak with incoming party.

TO ORIGINATE A CALL USING SPEED CALLING (ONE-TOUCH BUTTONS)

◆Press the desired Speed Call button, or press

Speaker and Speed Call.

TO PROGRAM

Note: Available only on Dterm stations with speed calling keys.

◆Press Feature button.

◆ Press desired Speed	SPEED SET
Call button.	(Time Display)

◆Enter desired

telephone number or feature code on the keypad. Display indicates digits dialed.

◆Press Feature again to save the number.

17

Image 17

NEC 2400IPX manual Multiline Appearance, To Originate a Call Using Speed Calling ONE-TOUCH Buttons

Contents

Dterm NEC AMERICA, INC Table of Contents DND Do Not Disturb Keys and LampsLCD Call Indicator LampSoft Keys MIC Microphone Exit KeyHelp Key FDA Call Forwarding All Calls FDB Call Forwarding BusyHold Call Hold CW Call WaitingPick Call Pickup Group Conf Three-way CallingSPD Speed Calling System CAS CAS Switch Hook FlashFlash Flash FDN Call Forward No AnswerRLS Release Key Hset HeadsetGpick Call Pickup Group Enhancement Ckeep Eight-Party Conference RetrainChcnf Call Hold Conference Terminal Setup with the UP/DOWN KEYDisplay Function Next Display Function PreviousTo change microphone status Terminal Setup with the Feature KEYPress Feature To set hands-free on To Originate AN Internal Call Multiline Appearance To Originate a Call Using Speed Calling ONE-TOUCH ButtonsTo Originate a Call Using Speed Calling INDIVIDUAL/GROUP Key To Originate a Call Using Speed Calling SystemPress Voice Speak to called party Voice CallAutomatic Intercom To Answer a Voice Call HANDS-FREEManual Intercom Press Dicm key Dial IntercomTo Place a Call on Hold Press Hold twice To Place a Call on Exclusive HoldTo Transfer a Call Conf Soft Key ConferenceTo Establish a Broker Call Call PICK-UP Direct Call PICK-UP GroupCalling party OFF-HOOK Trunk Queuing Last Number Redial Call Forwarding ALL Calls Call Forwarding Busy Line To CancelForward SET is displayed Call Forwarding Busy Line is set Call Forwarding DON’T Answer 8D/16D/32D LCD displays Station Call Destination is canceled Option Do not DisturbPage Index Page Page DDD Callpark SET LCD DisplaysForward Xxxx HANDS-FREE MSG Xxxx Hhmmpm Overridexxxx RCV VOL. SMALL/LARGE Voice BUSY/REST LCDNOTE1 Face LayoutDTERM16D 16-LINE with Display Dterm 32D 32-LINE with Display DTERM8 8-LINE NON Display FPO BAR Code