NEC 2400IPX manual Face Layout, LCDNOTE1

FACE LAYOUT

1 CALL INDICATOR LAMP

Lamp at top corner of Dterm Display flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left.

2 LCD(NOTE1)

Liquid Crystal Diode (LCD) display provides Dterm activity information plus date, time and Soft Key Operation. The LCD display has 24-character, 3-line capability.

3EXIT

The user can escape from the Help key mode by pressing this key.

4 SOFT KEYS

Any feature shown at the bottom of the LCD display is available. The appropriate feature key is displayed on the screen according to the call handling process.

5HELP

Explanations of the Soft Keys can be called up on the LCD display by pressing this key.

6 PROGRAMMABLE KEYS

[Programmable by telephone system administrator (Flexible Line/Feature Keys)]

•Station line access

•Trunk line access

•Feature access

[Programmable by user (Flexible Line/One-Touch Speed Dial)]

<Flexible Line>

• Station line access

•Trunk line access

•Feature access

<One-Touch Speed Dial> (Note 2)

•Any feature can be assigned.

•Direct station selection

•Station speed dial

7RECALL

Press key to terminate established call and return to the internal dial tone.

8FEATURE

Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys.

9 DIRECTORY (NOTE 3)

Press key to activate speed calling – system feature.

10 MESSAGE (NOTE 3)

Press key to access the voice mail system.

11MIC

Press key to respond hands free. LED on this key lights during speakerphone operation.

12CONF

Press key to establish a three-way conversation. LED on key lights when key is active.

13 LNR/SPD (LAST NUMBER CALL/SPEED CALLING) Press key to activate redial feature. Press redial and scroll back through numbers that have been dialed until the desired number is displayed. Press the ❉ or # (Note 4) key to activate dialing.

70