Using BOOTPL32
First follow these directions to set up TCP/IP in Windows 95/98 and Windows NT 4.0:
Installing the TCP/IP Protocol
1.In Windows, open the Network control panel.
2.If TCP/IP Protocol is not installed, install it in the following step (in Windows 95).
a. Select Configuration Tab in the Network control panel and click Add button.
b.When Select Network Component Type dialog box is displayed, select Protocol and click Add button.
c.When Select Network Protocol dialog box is displayed, select Microsoft and TCP/IP and click OK button.
d.Then, TCP/IP Protocol is installed.
e.Restart. The new protocol and service will not be available until system is restarted.
Assigning the IP Address
Use BOOTPL32 to set the IP address and other TCP/IP parameters manually. You can also use ARP/ping commands if you prefer.
1.Insert the SuperScript Color Laser CD.
2.Launch BOOTPL32
In Windows access the CD ROM drive and launch BOOTPL32 from the bootp directory
or Type E:\BOOTP\BOOTPL32.EXE from the Start>Run dialog box.
14 SuperScript Color Laser Network Guide
