NIC FEATURES
NIC Status Lights
When the NIC is installed, its two status lights, amber and green, are located on the Interface Panel on the back of the printer. Light patterns for normal operation are:
Green light is on solid: This shows normal operation while the printer is awaiting print jobs.
Amber light blinks continuously: This shows that the NIC is receiving a print job.
Green light blinks 3 times and stays on: This occurs when the printer has performed a successful
Light patterns that identify error conditions are described in Appendix A, “Troubleshooting” see page 57.
Resetting the NIC
If you change network settings, you may need to reset the NIC for the new settings to take effect.Turn the printer off and then on again, or:
1.Go to the URL Configuration Page, the URL is http://<IP address>/configure.html.
2.Click on the Network Administration link. This displays the Network Administration Page.
3.Click Reset in the System column,
Restoring Factory Default Settings
You can reset the NIC to its factory default settings. This means that the NIC clears data such as names and IP addresses. It does not lose its serial number or Network Address. If you have changed the printer’s name, it will revert to its default name.
note: You should restore factory defaults when the printer is moved to a different network.
To reset the NIC to factory default settings
Go to the Network Administration Page and click Factory Defaults in the System column. You will need to enter a password (the default is sysadm). Then turn the printer off and on again. The Network Administration Page is described in Chapter 4.
10 SuperScript Color Laser Network Guide
