Chapter 7 Disk Array Configuration Setting
IV-49
You can change the logical disk format and name later from the main window on the iSM
client or according to 7.2.4 “Renaming a Logical Disk”.
Table 7-1 List of Formats
Format Description
A4 Logical disk operated on the ACOS-4 system (If you are setting this
format, ask our maintenance engineer.)
A2 Logical disk operated on the ACOS-2 system
AX Logical disk operated on the AIX system
CX Logical disk operated on the Solaris system
NX Logical disk operated on the HP-UX system
LX Logical disk operated on the Linux system
WN Logical disk operated on the Windows system
(1) Any logical disk name that does not conform to the following rules is invalid:
y Number of available characters: 1 to 24 characters
y Available characters: Alphabet A to Z (a to z)
* Upper- and lower-case characters are distinguished.
Numerals: 0 to 9
Underbar: _
Slash: /
* All the characters must be 1-byte characters.
(2) An invalid specification applies the logical disk name to be assigned by default.
(3) On the ACOS-4 system, use the logical disk id names same with those on the host.
For details about the format A4, refer to Appendix G “ACOS-4 Resource Operation Guard”.