Chapter 7 Disk Array Configuration Setting
IV-83
On unsuccessful completion, the following screen is displayed:
Figure 7-70 Screen On Unsuccessful Completion
Possible causes of an LD batch binding failure may be a communication error between the iSM server and the
iSM client, a problem in the disk array, and so forth. If a communication error is the cause of unsuccessful
completion, the instruction to do batch binding the logical disks has been correctly issued, thus re-connect the
iSM client and check for the communication between them. If there may be an error in the disk array, check the
operation records in which the iSM server is logging errors. Then, take an appropriate measure for the error
according to the iSM server log, then try to redo batch binding the logical disks.