Appendix F Batch Setup File
42
<Explanation>
(a) If the first line except the comment line does not contain this character string, an error
(“[05254] It is not a file for Batch Setting.”) is posted.
(b) A line starting with a semicolon (;) or sharp (#) in a CSV-format text file is processed as a
comment line. Use a comment line mainly as the title of an item.
(c) If pairing a single MV with multiple RVs, create a line for each pair.
(d) If the disk array name of RV is omitted, the system assumes that the RV belongs to the disk
array of the MV.
(e) Declare creation of an AT-group.
(f) Create an AT-group on the specified disk array.
(g) Declare registration of volumes to the AT-group.
(h) Each specified volume must be a PV (Primary Volume) and set for one RDR pair. In
addition, when you register multiple volumes to an AT-group, the volumes need to be
located on the same disk array. RDR pair volumes (RVs) set for registered volumes are
also need to be located on the same disk array.
(i) Declare deletion of a volume from an AT-group.
(j) Specify a volume registered to a specified AT-group.
(k) Declare deletion of an AT-group.
(l) Delete all volumes registered to the AT-group you are going to delete.
(1) Use a half-size space between characters.
(2) Do not enter a space preceding or following a character string.
(3) If the file does not begin with “Pair Name List”, except for comment lines, an error (“[05254] It
is not a file for Batch Setting.”) occurs.
(4) If a character string is preceded by a space or followed by a space, an error (“[05254] It is not a
file for Batch Setting.”) is posted.
(5) Any AT-group name that does not conform to the following rules is invalid:
y Number of available characters 1 to 32 characters
y Available characters Alphabet: A to Z (a to z)
* Upper- and lower-case characters are distinguished.
Numerals: 0 to 9
Underbar: _
Slash: /
* All the characters must be 1-byte characters.