Chapter 7 Disk Array Configuration Setting
IV-68
[Next] button: One of the following screens is displayed according to the specified way of binding the
logical disks:
• Check-marking on [Only specify the number of LDs]:
Displays the “Specify Number of LDs” screen.
• Check-marking on [Only specify LD capacity]:
Displays the “Specify the Capacity” screen.
• Check-marking on [Specify both the number of LDs and LD capacity]:
Displays the “Specify Number of LDs and LD Capacity” screen.
[Back] button: Displays back the “Confirmation for Pool Binding Parameter” screen.
[Cancel] button: Displays a confirmation to ask whether you want to quit the wizard, then the wizard closes
if agreed.
Although the capacity specified in the field is that of the region you can use, there are some region for controlling
the disks of the pools in addition to the region usable by the user.