Chapter 7 Disk Array Configuration Setting
IV-92
(A) Configuration tree view
The configuration tree view shows disk configurations in the disk array, classifying them into four categories in
the form of a tree:
y Dynamic Pool
Indicates dynamic pool(s) already bound in the disk array.
y Basic Pool
Indicates basic pool(s) already bound in the disk array.
y Spare
Indicates spare(s) already bound in the disk array.
y Unused
Indicates physical disk(s) that remain unassigned to any pool or spare.
(B) Detailed information view
The detailed information view shows any of the following information according to the selection in the
configuration tree view:
<When you select a disk configuration>
The number of basic pools, number of dynamic pools, number of spares, and number of unused logical disks are
displayed by the category.
<When you select Dynamic Pool>
Pools already bound are listed.
y [Pool] tab
The [Pool] tab shows the name, RAID type, capacity, and so forth about the pool selected. You can expand
the capacity of the pool, rename it, change the rebuild time, and unbind the pool on this tab.
<When you select individual component of a dynamic pool>
Detailed information about the pool is displayed on the [Logical Disk] tab and [Physical Disk] tab:
y [Logical Disk] tab
The [Logical Disk] tab shows a list of logical disks bound in the pool. You can expand the capacity of the
logical disks, rename it, or unbind the logical disks on this tab.
y [Physical Disk] tab
The [Physical Disk] tab shows a list of physical disks that compose the pool.
<When you select Basic Pool>
Pools already bound are listed.
y [Pool] tab
The [Pool] tab shows the name, RAID type, capacity, and so forth about the pool selected. You can rename
the pool, change the rebuild time, and unbind the pool on this tab.