Chapter 10 Access Control Operations
IV-210
listed in the list view by clicking tree items.
y In the tree view, LD Sets and path information linked with the LD Sets are displayed.
: Item that shows all LD Sets
: LD Set linked with path information
: LD Set unlinked with path information
The following two icons indicate abnormal settings. If these icons are displayed, it is necessary to change the
setting to the normal setting.
: LD Set in which a port in the WWN mode and a port in the Port mode are mixed
: LD Set in which the assignment of logical disks is different for each path information item
y By clicking right-button after selecting LD Set, the pop-up menu appears allowing selection of name change of
LD Set. Selecting the menu displays the LD Set name change screen.
y Check boxes are displayed for the “LD Set” item that shows all LD Sets in the tree item, each LD Set name, and
path information linked with the LD Sets in the tree item.
Furthermore, a check box for path information is activated associated with a check box for the linked LD Set.
Check boxes are used for the following purposes:
y Select [Add], [New Setting] logical disks target LD Set
y Select [Link Path] target LD Set
y Select [Delete] target LD Set
y Select LD Set to [Delete] assigned logical disks
However, when selecting multiple LD Sets simultaneously to [Add]/[Delete] logical disks, the assignment states
of logical disks for all the LD Sets must coincide.
When activating the check boxes, display contents of the list view are switched as follows:
y When selecting an LD Set, the list of the logical disks assigned to the selected LD Set is displayed.
y When selecting multiple LD Sets, if the assignment states of logical disks for all the selected LD Sets are the
same, the list of logical disks is displayed.
y If the assignment states of logical disks for the selected LD Sets do not coincide, the list of the selected LD Sets
is displayed.