Advanced OSM Controls – continued
Tag 6 | OSM LOCKOUT | 2: OSM LOCK OUT with no control: This mode prevents access |
continued | continued | to all OSM functions. To activate, press the SELECT and |
|
| “Right” buttons simultaneously. To deactivate, press the SELECT |
|
| and “Right” buttons simultaneously, while in the OSM menu. |
|
| 3: OSM LOCK OUT with BRIGHTNESS (only) control: This |
|
| mode locks all OSM functions except for BRIGHTNESS. |
|
| To activate, press the SELECT, “Left” and “Down” buttons |
|
| simultaneously, while in the OSM menu. |
|
| To deactivate, press SELECT, “Left” and “Down” buttons |
|
| simultaneously, while in the OSM menu. |
|
| 4: CUSTOM: Press RESET and EXIT to enter the CUSTOM |
|
| Menu. Select ENABLE or DISABLE for: POWER KEY, INPUT |
|
| SEL, BRIGHTNESS, CONTRAST, ECO MODE,WARNING. |
|
| To Deactivate the OSM Lock Out function, press RESET and |
|
| EXIT to bring up the LOCK OUT warning. Press SELECT, |
|
| SELECT, <, >, <, >, EXIT. |
| SIGNAL | Signal information can be displayed in the corner of the screen. |
| INFORMATION | Signal information is either “ON/OFF”. |
| RESOLUTION | The Resolution Notifier warns the user if the input to the monitor |
| NOTIFIER | is set to something other than the optimized resolution of |
|
| 1280 x 1024. If the monitor detects a signal that is not at the |
|
| optimized resolution, after 45 seconds a warning message will |
|
| appear on the screen. The Resolution Notifier is set to ON by |
|
| default. |
Tag 7 | INFORMATION | Provides information about the current display resolution Techni- |
|
| cal data, including the preset timing currently being used and |
|
| the horizontal and vertical frequencies is also displayed. |
20
