NEC LCD1990FXTM user manual Quick Start - continued

Quick Start – continued

30 Tilt

Highest

Stand

Position

power card

(DC out for optional NEC products such as the Soundbar attachment. Do not use thisconnector unless specified.)

Figure 4

Figure 5

6.Hold all of the cables firmly and place the cable cover onto the stand (Figure 7).

7.Slide the Cable Cover back into its correct position (Figure 8). Connect the power cord to power outlet.

NOTE: Please refer to the Recommended Use section of this manual for proper selection of power cord.

8.The vacation switch on the back side of the monitor near the AC inlet must be in the ON position for the monitor to function (Figure 9).

Turn on the monitor using the front power button, then turn on the computer.

NOTE: The Vacation Switch is a true on/off switch. If this switch is in the OFF position, the monitor cannot be turned on using the front button.

DO NOT turn the vacation switch ON/OFF repeatedly.

9.For Analog input only: Upon initial setup, the No-Touch Auto Adjust feature automatically adjusts the monitor to the optimal settings that are needed for most signal timings.

For further adjustments, refer to the Controls section of this Userʼs Manual for a full description of the OSM controls.

For download information on the Windows® 95/98/Me/2000/XP INF file for your monitor, visit www.necdisplay.com/support.

NOTE: If you have any problems, please refer to the Troubleshooting section of this Userʼs Manual.

4