Fig. 5: Removing the riser board
Removing a PCI or CNR Expansion Card
To remove a PCI or CNR expansion card, first remove the stabilisers (see Removing the Stabilisers), open the chassis (see Opening the Chassis), remove the riser board bracket (see Removing the Riser Board Bracket and the Riser Board), then follow the next steps:
1.Remove the screw holding the PCI or CNR expansion card in place.
2.Extract the PCI or CNR expansion card from its slot and put it aside.
Removing the AGP Expansion Card
To remove an AGP expansion card, first remove the stabilisers (see Removing the Stabilisers), open the chassis (see Opening the Chassis), then follow the next steps:
1.Remove the screw holding the AGP expansion card in place.
2.Unlock the AGP expansion card by putting the AGP lock in the unlocked position.
Fig. 6: Removing an AGP expansion card
X1
X1
NEC PowerMate ML5 Disassembly Manual | Page 7 |
