NEC MT1075/MT1065 user manual Picture not available for Viewer and LAN, Sound, Image Options

Entry Edit Command

You can edit signals on the Entry List.

Load	Enables you to select a signal from the list.
Store	Enables you to store the currently projected signal.
Cut	Enables you to remove a selected signal from the list
	and place it on the "clipboard" in the projector.
Copy	Enables you to copy a selected signal from the list
	and place it on the "clipboard" in the projector.
Paste	Enables you to paste the signal placed on the "clip-
	board" to any other line of the list. To do this, select
	"Paste" and then select the line number you want to
	paste to. Last press ENTER.
Edit	Enables you to change source names or add source
	names to "More" in the Sorce Select.
	Source Name ..	Enter a signal name. Up to 18 alpha-
		numeric characters can be used.
	Input Terminal ..	Change the input terminal. RGB1
		and RGB2 are available for RGB sig-
		nal; Video and S-Video are available
		for composite signal.
	Source List	Set signal selection method.
	Lock	Set so that the selected signal can-
		not be deleted when "All Delete" is
		executed.
	Skip	Set so that the selected signal will
		be skipped during auto search.
	When complete, select OK and press ENTER. To exit
	without storing setting, select Cancel. Select "Source
	Name" and press ENTER to display the Source Name
	Edit window. You can change source name on this
	window. Press [	] to display the software keyboard,
	which you can enter alphanumeric characters. See
	page E-64 for the key function of the software key-
	board.
All Delete	This feature enables you to delete all the registered
	signals in the Entry List.

The following buttons are not available for the currently projecting signals:

1)The Cut and Paste buttons on the Entry Edit Command screen

2)The Input Terminal button on the Entry Edit screen

Picture (not available for Viewer and LAN)

Adjusting Brightness, Contrast, Color, Hue, and Sharpness

Brightness	Adjusts the brightness level or the back raster inten-
	sity.
Contrast	Adjusts the intensity of the image according to the
	incoming signal.
Color	Increases or decreases the color saturation level (not
	valid for RGB).
Hue	Varies the color level from +/- green to +/-blue. The
	red level is used as reference. This adjustment is only
	valid for Video and Component inputs (not valid for
	RGB).
Sharpness	Controls the detail of the image for Video (Not valid
	for RGB).

Sound

Controlling Volume, Bass and Treble.

Adjusts the sound, bass and treble level of the projector speaker and AUDIO OUT (RCA).

Image Options

Selecting Aspect Ratio (not available for Viewer and LAN)

Aspect Ratio allows you to select the best Aspect mode to display your source image.

When screen size 4:3 is selected for the source, the following selections will display:

4:3 .................. Standard 4:3 aspect

Letter Box ...... Reduced to display the true aspect with black bor-

ders on top and bottom

Wide Screen .. Left & Right stretched with black borders on top and bottom

Crop	Left & Right stretched.
	Left & Right sides cut. Available for 4:3 only.

When screen size 16:9 is selected for the source, the following selec- tions will display:

4:3 Window ....	Reduced to display the true aspect with black bor-
	ders on right and left
Letter Box	Standard 16:9 aspect
Wide Screen ..	Left and right stretched to display the true aspect
4:3 Fill	Stretched to display in 16:9 aspect ratio

NOTE: You can adjust image positions vertically for source with black borders. See page E-49 for setting image positions.

Copyright

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and em- ploying compression or expansion of the screen image with a "Aspect Ratio" or "Screen" setting may raise concern about the infringement of copyrights which are protected by copyright law.

NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available. Should this happen, first reset the 3D Reform data and then do setting again. Second repeat the 3D Reform adjustment.

Changing the aspect ratio can limit 3D Reform in its adjustable range.

Input

Signal

Screen
Type		4:3	Letterbox	Squeeze
4:3 Screen		4:3	Letterbox	Wide Screen	Crop
16:9 Screen	4:3 Window	4:3 Fill	Letterbox	Wide Screen

E-40