NEC PA241W user manual Ntaa SW, English-19

Tag4	Auto Adjust	Automatically adjusts the Image Position and H.Size settings and Fine settings.
	(Analog input only)	Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is included
		in the enclosed CD-ROM.
	Signal Adjust	Determines when the auto adjustment is activated automatically.
	(Analog input only)	The choices are “SIMPLE” and “FULL”. Press “Left” or “Right” to select.
			H-size, Fine, H/V Position			Contrast
		SIMPLE		O			X
		FULL		O			O
		O: Automatic Adjustment		X: No Automatic Adjustment
		NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
	Auto Adjust Level	Determines the automatic adjustment level for Auto Adjust. The choices are “SIMPLE”,
	(Analog input only)	“FULL” and “DETAIL”. Press “Left” or “Right” to select. Refer to the below table.
			Size, Fine, Position		Contrast			Black Level		Time
		SIMPLE	O		X				X	1 second
		FULL	O		O				X	1.5 seconds
		DETAIL*	O		O				O	5 seconds
		O: Automatic Adjustment		X: No Automatic Adjustment
		* “DETAIL” activates automatic long cable (skew, peaking) adjustment.
	A-NTAA SW	The Advanced No Touch Auto Adjust function is able to recognize new signals even
	(Analog input only)	when neither the resolution nor the refresh rate has changed. If several PCs are
		connected to the monitor, and each transmit very similar (or even the same) signals in
		terms of resolution and refresh rates, the monitor recognizes that there is a new signal
		and automatically optimizes the picture without the need for any action on the part of the
		user.
		OFF: A-NTAA is disabled.
		ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal
		settings for the new signal. If no change in the signal is detected then A-NTAA does not
		activate. The screen will be blank while the monitor optimizes the signal.
		OPTION: Functions the same as ON, except that the screen does not go blank when the
		monitor makes adjustments for changes in signal, allowing the monitor to display the new
		signal faster. When using an external switching device to connect 2 or more PCs to the
		monitor, using the ON or OPTION settings is suitable.
	Auto Contrast	Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.
	(Analog input only)	Any adjustment requires the image to have white portions.
	Contrast	Adjusts the image brightness and contrast in relation to the background.
		Press “Left” or “Right” to adjust.
	Auto Black Level	Automatically adjusts the black level. Any adjustment requires the image to have black
	(Analog input only)	portions. Press “SELECT” to activate Auto Adjust.
	Black level	Adjusts the RGB black level by input signal level.
	(Analog input only)
Tag5	H.Position	Controls Horizontal Image Position within the display area of the LCD.
		Press “Left” or “Right” to adjust.
	V.Position	Controls Vertical Image Position within the display area of the LCD.
		Press “Left” or “Right” to adjust.
	H.Size	Adjusts the horizontal size of the screen.
	(Analog input only)	If the “AUTO Adjust function” do not give you a satisfactory picture setting, a further
		tuning can be performed using the “H.Size (V.Size)” function (dot clock). For this a Moiré
		test pattern could be used. This function may alter the width of the picture. Use left/Right
		Menu to center the image on the screen. If the H.Size (V.Size) is wrongly calibrated, the
		result would look like the left drawing. The image should be homogeneous.
	Fine	Improve focus, clarity and image stability by increasing or decreasing this setting.
	(Analog input only)	If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory
		picture setting, a fi ne tuning can be performed using the “Fine” function. For this a Moiré
		test pattern could be used. If the Fine value is wrongly calibrated, the result would look
		like the left drawing. The image should be homogeneous.
	Auto Fine	This function automatically and periodically adjusts the “FINE” setting for change in signal
	(Analog input only)	condition. This function adjusts approximately every 33 minutes.
	H.Resolution	Adjusts the horizontal size by increasing or decreasing the setting.
		Press “Right” button to expand the width of the image on the screen.
		Press “Left” button to narrow the width of the image on the screen.

English

English-19