English-17
English
GAMMA Allows you to manually select the brightness level of grayscale. There are fi ve selections:
sRGB, L Star, DICOM, PROGRAMMABLE and CUSTOM. We recommend to show
grayscale image data on screen.
sRGB: GAMMA setting for sRGB.
L Star: GAMMA for Lab color space.
DICOM: DICOM GSDF (Grayscale Standard Display Function) is possible for medical
imaging.
PROGRAMMABLE: The brightness of grayscale can be changed to your preference by
downloading the application software.
CUSTOM: Below items can be adjusted when CUSTOM is selected as the GAMMA
SELECTION setting.
Custom Value: The gamma value is selected from the rate of 0.5 to 4.0 by 0.1 steps.
BLACK Adjusts the black luminance. When low settings are selected that cannot be displayed,
the indicator on the OSD will turn magenta.
RED
GREEN
BLUE
Adjusts color gamut. Magenta warns color saturation due to outside of LCD gamut.
COLOR VISION EMU Emulates color visions for difference color sense. P, D, T is for dicromats and Grayscale
is for contrast regibility checking.
UNIFORMITY This function electronically compensates for the slight variations in the white uniformity
level as well as for deviations in color that may occur throughout the display area of
the screen. These variations are characteristic of LCD panel technology. This function
improves the color and evens out the luminance uniformity of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display,
then UNIFORMITY should be turned off. A higher number produces a better effect, but
may also reduce CONTRAST RATIO. When BRIGHTNESS is shown in magenta, the
UNIFORMITY setting is automatically changed.