4.Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor.
NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module’s life.
English
30° Tilt
USB downstream
Highest
Stand
Position
USB downstream
USB upstream1
USB upstream2
DisplayPort
A Type |
A Type |
B Type |
B Type |
Figure C.1a |
Power cord
*NEC optional product attachment.
Do not use this connector unless specifi ed.
Figure C.1
5.To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly (Figure C.2 and Figure C.3).
6.Please check that you can still rotate, raise and lower the monitor screen when you have installed the cables.
Power Cord
USB Cable
DisplayPort
Cable
Power Cord
D-SUB
DVI-1/DVI-2
Cables
USB Cable
Figure C.2 | Figure C.3 |
