![Sync. Control ( Pins Nos 1 and 2 )](/images/new-backgrounds/106125/10612527x1.webp)
19
Functions and Settings of DIP SW 2
This DIP switch is used for Sync. Control and Intelligent Power Manager.
Set all pins to the OFF position except No. 3 pin during normal operation.
No.1 |
| SYNC. CONTROL |
|
| No.3 | ON: Auto selection for video standard | |
|
|
| OFF: Manual selection for video standard | ||||
No.2 |
|
|
|
|
|
| |
| MODE | DIP SWITCH |
| No.4 | ON: Manually selecting PAL | ||
|
|
| |||||
|
| No.1 | No.2 |
| OFF: Manually selecting NTSC | ||
|
|
|
| ||||
|
|
|
|
|
|
| ON: Manually selecting SECAM |
|
| AUTO CONTROL | OFF | OFF |
| No.5 | |
|
|
| OFF: Manually selecting other | ||||
|
| (Sep, Comp, Sync on G) |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| No.6 | ON: Manually selecting 4.43 NTSC | |
|
|
|
|
|
| ||
|
| MANUAL 1 (Comp. Sync) | OFF | ON |
| OFF: Manually selecting other | |
|
|
|
| ||||
|
|
|
|
| |||
|
| MANUAL 2 (Sync. on G) | ON | OFF |
| No.7 | Not Used |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| UNUSED | ON | ON |
| No.8 | ON : Intelligent Power Manager ON |
|
|
|
|
|
|
| OFF: Intelligent Power Manager OFF |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Sync. Control ( Pins Nos 1 and 2 )
These pins set Sync. Control.
Set both pins to OFF position during normal operation.
Pin No.1 (Sync. on Green Control)
Set pin No.1 to the ON position and pin No. 2 to the OFF position when sync on green signals are necessary for synchronization with an external component. Pin No.2 (Composite Sync Control)
Set pin No. 2 to the ON position and pin No. 1 to the OFF position for H/V composite sync signals.
NOTE: When pins Nos. 1 and 2 are set to the OFF positions, the monitor automatically determines if the input signal is separate sync, composite sync or
Pin No. 8 (Intelligent Power Manager)
This function saves power.
When Intelligent Power Manager control is on:
When no horizontal sync. signal is present, the STANDBY/POWER indicator is lit yellow.
When no vertical sync. signal is present, the STANDBY/POWER indicator is lit orange.
When neither horizontal nor vertical sync. signal is present, the STANDBY/ POWER indicator is lit orange.
NOTE: The Intelligent Power Manager works only for the RGB input. If se- lecting the VIDEO input, or when connecting to no signal source, the Intelli- gent Power Manager does not work.
20