NEC PlasmaSync 3300 user manual B A C E G, Visual Control

I

H

8

9

D F

	ON POWER OFF		DEGAUSS
	VIDEO1VIDEO2 RGB1		RGB2
ON	WIDTH
OFF	HEIGHT	POSITION/CONTROL
	SIDE PIN
	SCAN SELECT
			NORMAL
	RGB/VIDEO	VIDEO
	CONTRAST BRIGHT COLOR TINT		SHARPNESS
	VISUAL CONTROL		NORMAL
	VOLUME		MUTE
	ON SCREEN	EXIT PROCEED
	MULTIMEDIA MONITOR RD-336E

0

B

A C

E

G

13

Visual Control

8 RGB/VIDEO

CONTRAST ( ˜ / ˜ ) ......... Adjusts the image brightness in relation to the

		background.
		Press and hold	˜	for higher contrast.
		Press and hold ˜ for lower contrast.
9 RGB/VIDEO
BRIGHT ( ˜ / ˜ )	..............	Adjusts the overall image and screen bright-
		ness.
		Press and hold	˜ for a brighter picture.
VIDEO		Press and hold ˜ for a darker picture.
0 COLOR ( ˜ / ˜ )		Adjusts color intensity of VIDEO display.
		Press and hold	˜ for more color saturation.
VIDEO		Press and hold ˜ for less color saturation.
A TINT ( ˜ / ˜ )		Adjusts red and green values of VIDEO display.
		Press and hold	˜ for a greener tint.
		Press and hold ˜ for a redder tint.
VIDEO		This control does not work for the PAL signal.
B SHARPNESS ( ˜	/ ˜ )	Adjusts picture detail of VIDEO display.
		Press and hold	˜ for a sharper picture.
		Press and hold ˜ for a softer picture.

NOTE: The COLOR, TINT and SHARPNESS keys work for the VIDEO display only.

NOTE: The VISUAL CONTROL storing operation is effective only for one input (VIDEO1, VIDEO2, RGB1 or RGB2).

C NORMAL	This key resets the picture adjustment set-
	tings of user changeable memory and recalls
	the factory preset data.

NOTE: The CONTRAST, BRIGHT, COLOR, TINT and SHARPNESS ad- justment level are factory preset at the optimum position.

D VOLUME ( ˜ / ˜ )	Adjusts the volume.
	Press and hold ˜ to decrease sound.
	Press and hold ˜ to increase sound.
E MUTE	Press to cancel sound ; press again to restore
	sound.

NOTE: The other ways to restore sound are to press POWER ON, then OFF and to press VOLUME keys on the remote control unit.

F EXIT	Press to exit the OSM controls in the main
	menu. Press to exit to the previous menu in a
	submenu.
G PROCEED	Press to access OSM. Press to proceed to
	the selected menu choice (indicated by the
	arrow). Press to move the arrow down to se-
	lect one of the choices.
NOTE:
• Other control keys than POSITION/CONTROL + / -, ˜ / ˜, and NORMAL are
not available during the OSM screen display.

• Other control keys than POSITION/CONTROL + / -,	˜ / ˜, and NORMAL can
be directly to access to each control. OSM controls are not possible in that
case.

HBacklight Switch	Set to ON to light up keys from the inside of
	the remote control panel.This is useful when
	the remote control unit is used in a darkened
	room.

NOTE: The backlight key characters may be invisible in a bright-lit room. Make sure that the backlight switch is OFF when the remote control unit is not used. If no button operation is made within 30 seconds when the backlight is lit in the wireless condition, the backlight go off automatically. To turn the backlight on again, set the switch to the OFF position, then set it to the ON position.

I Remote Jack ...................... Insert the plug of the supplied remote cable

when using the supplied remote control unit in the wired condition. Connecting the moni- tor and the remote control unit with the sup- plied remote cable turns on the backlight in- dependent of the backlight switch setting when the monitor is powered on.

14