NEC PlasmaSync 3300 G Rgb, H External Speaker Terminals, I Internal Speaker Terminals, J AC Input

9

J H

I

G

G RGB 2

R, G, B, H/CS and V IN (BNC).....These are analog RGB input terminals.

Connect external components with R, G, B, H/CS, and V output terminals to these analog RGB input terminals. Be sure that the RGB connection cable is correctly attached to the corresponding terminals.

R, G, B, H/CS and V THROUGH OUT (BNC)..... Connect to a second monitor's

RGB inputs to relay the RGB signal inputs at R, G, B, H/CS and V IN.

75Ω/HIGH Impedance Select Switchs for RGB and H/CS&V..... Set to "75 Ω"

during normal operation. In multiple connections using R, G, B, H/CS and V IN and OUT terminals, set to "HIGH" on all but the last monitor. Set to "75 Ω"

on the last monitor only.

H External Speaker Terminals

+RIGHT.....Connect RIGHT speaker positive wire here.

-RIGHT.....Connect RIGHT speaker negative wire here.

-LEFT.....Connect LEFT speaker negative wire here.

+LEFT.....Connect LEFT speaker positive wire here.

I Internal Speaker Terminals

To enable the internal speakers, use the supplied speaker cables to con- nect between the external speaker terminalsH and here.

J AC Input

Connect the supplied power cord' s three-pin plug here. 10