Remote Control Unit
1 | ON POWER OFF |
| DEGAUSS |
|
|
| |
| VIDEO1VIDEO2 RGB1 | RGB2 | |
2 |
|
|
|
ON | WIDTH |
|
|
OFF | HEIGHT | POSITION/CONTROL | |
| SIDE PIN |
|
|
| SCAN SELECT |
|
|
| RASTER CONTROL | NORMAL | |
| RGB/VIDEO | VIDEO | |
| CONTRAST BRIGHT COLOR TINT | SHARPNESS | |
| VISUAL CONTROL | NORMAL | |
| VOLUME |
| MUTE |
| ON SCREEN | EXIT PROCEED | |
| MULTIMEDIA MONITOR |
3
4
5
6
7
11
1 POWER ON/OFF | Press POWER ON to turn the monitor on |
| when the STANDBY/POWER indicator is lit |
| orange. |
| Press POWER OFF to turn the monitor off |
| and the monitor will go into the standby condi- |
| tion. |
2 VIDEO 1 | Press to select reception of a conventional |
| component or |
| nected to VIDEO 1 IN terminal. |
3 VIDEO 2 | Press to select reception of a conventional |
| component or |
| nected to VIDEO 2 IN terminal. |
4 RGB1 | Press to select reception of a component |
| connected to RGB 1 IN terminal. |
5 RGB 2 | Press to select reception of a component |
| connected to RGB 2 IN terminal. |
Raster Control
6 POSITION/CONTROL | Adjusts the vertical position of the image up |
(˜/ ˜ / ◀ / ♣) | and down, and the horizontal position of the |
| |
| image from left to right. |
CONTROL (. /,) | Moves the bar in the , or . direction to in- |
| crease or decrease the adjustment in an |
| OSM submenu. |
CONTROL( ˜ / ˜) | Moves the arrow up or down to select one of |
| the controls. |
7 NORMAL | This key resets the raster adjustment set- |
| tings of user changeable memory and recalls |
| the factory preset data. |
NOTE: This can be done to only the signal having the factory preset data.
12