NEC PlasmaSync 3300 user manual Part Names and Functions, Front View

3

Part Names and Functions

Front View

VIDEO 1/VIDEO 2/RGB 1/RGB 2/PROCEED/EXIT

				4
9 8	7	6	5		3 2	1

1 POWER		Press to power the monitor on and off.
2 STANDBY	/POWER	Lights green during normal operation.
Indicator		Lights orange when the monitor is in standby
		mode.
3 Remote Sensor Window		Receives infrared signal from the remote control
		unit.
4 EXIT		Press to exit the OSM controls in the main menu.
		Press to exit to the previous menu in a submenu.
5 PROCEED		Press to access OSM. Press to proceed to the
		selected menu choice (indicated by the arrow).
		Press to move the arrow down to select one of
		the choices.
6 RGB 2		Press to select the RGB source that is connected
		to the RGB 2 input terminals (BNC type).
7 RGB 1		Press to select the RGB source that is connected
		to the RGB 1 input terminal (mini D-SUB 15 pin
		type).

8 VIDEO 2	Press to select the video source that is
	connected to the VIDEO 2 input terminal
	(BNC type or S-VIDEO 2 IN).
9 VIDEO 1	Press to select the video source that is
	connected to the VIDEO 1 input terminal
	(BNC type or S-VIDEO 1 IN).

NOTE: S-VIDEO IN terminals will take preference over VIDEO IN termi- nals when the video source is connected to each terminal and VIDEO 1 or 2 selected.

4