NEC PX-61XM4A Enabling/disabling remote control wireless transmission, Loop Out setting

Enabling/disabling remote control wireless transmission

This function enables/disables remote control wireless transmission.

Example: Setting “OFF”

On “IR REMOTE” of “OPTION3” menu, select “OFF”, then press the MENU/ENTER button.

OPTION 3		3 / 4
PREVIOUS PAGE
TIMER
PWR . ON MODE
CONTROL LOCK	:	OFF
IR REMOTE	:	OFF
LOOP OUT	:	OFF
REMOTE ID	:	ALL
ID NUMBER	:	ALL

VIDEO WALL

NEXT PAGE

SEL. ADJ. EXIT RETURN

Information

⬛IR REMOTE settings

ON: Enables remote control wireless transmission.

OFF: Disables remote control wireless transmission. Set “OFF” to avoid unwanted control from other remote controls.

Loop Out setting

When this feature is set to ON, the received signal will be looped out.

Example: Setting “ON”

On “LOOP OUT” of “OPTION3” menu, select “ON”.

OPTION 3		3 / 4
PREVIOUS PAGE
TIMER
PWR . ON MODE
CONTROL LOCK	:	OFF
IR REMOTE	:	ON
LOOP OUT	:	ON
REMOTE ID	:	ALL
ID NUMBER	:	ALL

VIDEO WALL

NEXT PAGE

SEL. ADJ. EXIT RETURN

Information

⬛LOOP OUT settings

ON: The received signal will be looped out via PC1 terminal or VIDEO1 terminal.

OFF: The received signal will not loop out.

*Even if LOOP OUT is ON, signals won’t be sent out if POWER is being turned off.

⬛To connect another display...

See page En-6.

⬛If the RGB/PC1 signal is present at the time the power switched on...

The RGB/PC1 input will be displayed regardless of the setting of LOOP OUT.

REMOTE ID setting

Set the remote code to adapt the plasma monitor to the remote control.

Example: Setting to “1”

On the “REMOTE ID” of “OPTION3” menu, select “1”.

•Press and hold the POWER ON button, and release the button when the indication saying that the code is set is displayed. Or, press and hold the POWER STANDBY button, and release the button when the power is turned off.

Information

⬛REMOTE ID setting

ALL: The remote code is not set.

1 to 4: The specified remote code is applied.

ID number setting

When using more than one of these displays, this function sets ID numbers so that operation of the remote control does not cause multiple monitors to operate at the same time.

Example: Setting “2”

On “ID NUMBER” of “OPTION3” menu, select “2”.

	OPTION 3		3 / 4
PREVIOUS PAGE
TIMER
PWR . ON MODE
CONTROL LOCK		:	OFF
IR REMOTE		:	ON
LOOP OUT		:	OFF
REMOTE ID		:	ALL
ID NUMBER		:	2
VIDEO WALL
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

*To reset back to ALL

Press the CLEAR/SEAMLESS SW button.

Information

⬛ID NUMBER settings

ALL: ID NUMBER will not be set.

1 to 256: ID NUMBER will be set.

⬛When the ID NUMBER have been set

You can also set ID NUMBER for each remote control to operate the plasma display individually. To do so, see below.

To set the ID number for the remote control

Example: Setting “2”

Press the ID SELECT button on the remote control. The “ID SELECT” screen appears.

On “ID NUMBER” of “ID SELECT” menu, select “2”.

	ID SELECT
	POSITION :	1
ID NUMBER	:	2
	ADJ.	EXIT RETURN

*To reset back to ALL

Press the CLEAR/SEAMLESS SW button.

		OPTION 3				3 / 4
	PREVIOUS PAGE
	TIMER
	PWR . ON MODE
	CONTROL LOCK		:	OFF
	IR REMOTE		:	ON
	LOOP OUT		:	OFF
	REMOTE ID		:	1
	ID NUMBER		:	ALL
	VIDEO WALL
	NEXT PAGE
	SEL.	ADJ.		EXIT	RETURN
Downloaded From TV-	Manual.com Manuals						En-31