NEC PX-50XM5A Picture Settings Menu, Adjusting the picture, Reducing noise in the picture

Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.

Example: Adjusting the contrast

On “CONTRAST” of “PICTURE” menu, adjust the contrast.

PICTURE		1 / 2
CONTRAST			: 52
BRIGHTNESS			: 32
SHARPNESS
			: 16
COLOR
			: 32
TINT			G : 32
	R
PICTURE MODE	:	NORMAL
NR	:	OFF

NEXT PAGE
SEL.	ADJ.	EXIT RETURN	CONTRAST	: 52

Note: If “CAN NOT ADJUST” appears ...

When trying to enter the PICTURE submenu, make sure PICTURE MODE is not set to DEFAULT.

Information

Picture adjustment screen CONTRAST: Changes the picture’s white level. BRIGHTNESS: Changes the picture’s black level. SHARPNESS: Changes the picture’s sharpness. Adjusts picture detail of VIDEO display.

COLOR: Changes the color density.

TINT: Changes the picture’s tint. Adjust for natural colored skin, background, etc.

Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer signal is connected.

Restoring the factory default settings

Select “DEFAULT” under the “PICTURE MODE” settings.

Setting the picture mode according to the brightness of the room

There are four picture modes that can be used effectively according to the environment in which you are viewing the display.

Example: Setting the “THEAT. 1” mode

On “PICTURE MODE” of “PICTURE” menu, select “THEAT. 1”.

PICTURE		1 / 2
CONTRAST			: 52
BRIGHTNESS
			: 32
SHARPNESS
			: 16
COLOR
			: 32
TINT			G : 32
	R
PICTURE MODE	:	NORMAL
NR	:	OFF

NEXT PAGE
SEL.	ADJ.	EXIT RETURN	PICTURE MODE	: THEAT. 1

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.

Example: Setting “NR-3”

On “NR” of “PICTURE” menu, select “NR-3”.

PICTURE		1 / 2
CONTRAST			: 52
BRIGHTNESS
			: 32
SHARPNESS
			: 16
COLOR
			: 32
TINT			G : 32
	R
PICTURE MODE
	:	NORMAL
NR	:	OFF

NEXT PAGE
SEL.	ADJ.	EXIT RETURN	NR	: NR - 3

Information

NR

*“NR” stands for Noise Reduction.

*This function reduces noise in the picture.

Types of noise reduction

There are three types of noise reduction. Each has a different level of noise reduction.

The effect becomes stronger as the number increases

(in the order NR-1→ NR-2→ NR-3). OFF: Turns the noise reduction function off.

Setting the color temperature

Use this procedure to set color tone produced by the plasma display.

Example: Setting “HIGH”

On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.

	PICTURE		2 / 2
PREVIOUS PAGE
COLOR TEMP.		:	HIGH
GAMMA		:	2
LOW TONE		:	AUTO
COLOR TUNE
SEL.	ADJ.		EXIT RETURN

Information

Setting the color temperature LOW: More red

MID LOW: Slightly red

MID: Standard (slightly bluer)

HIGH: More blue

	Information
	Types of picture modes
	THEAT. 1, 2: Set this mode when watching video in a
	dark room.
	This mode provides darker, finer pictures, like the
	screen in movie theaters.
	For a darker image, select THEAT. 2.
	NORMAL: Set this mode when watching video in a bright
	room.
	This mode provides dynamic pictures with distinct
	differences between light and dark sections.
	BRIGHT: This mode provides brighter pictures than
	NORMAL.
	DEFAULT: Use this to reset the picture to the factory
Downloaded	default settings.	En-20
	From TV-Manual.com Manuals