NEC PX-50XM5A, PX-42XM4A, PX-61XM4A user manual Option1 Settings Menu, Setting the on-screen menu

Option1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format (horizontal or vertical) etc.

Example: Turning the DISPLAY OSM off

On “OPTION1” menu, select “OSM”, then press the MENU/ ENTER button.

The “OSM” menu appears.

On “DISPLAY OSM” of “OSM” menu, select “OFF”.

		O S M
DISPLAY OSM		:	OFF
OSM ADJ .		:	1
OSM ANGLE		:	H
OSM ORBITER		:	OFF
OSM CONTRAST		:	LOW
SEL.	ADJ.		EXIT RETURN

Information

DISPLAY OSM settings

ON: The informations on screen size, volume control, etc. will be shown.

OFF: The informations on screen size, volume control, etc. will not be shown.

The DISPLAY button on the remote control will not function either.

OSM ADJUST settings

Adjusts the position of the menu when it appears on the screen.

The position can be set between 1 to 6.

OSM ANGLE settings

Sets the display format (landscape “H” or portrait “V”). When the unit is installed vertically set the OSM

ANGLE at “V”.
“H”				“V”
					OPTION1
	OPTION 1		1 / 4
	OSM				OSM
	BNC INPUT	:	RGB
	D - SUB INPUT	:	RGB		BNC INPUT
	RGB SELECT	:	AUTO
	HD SELECT	:	1080B		:	RGB
	INPUT SKIP	:	OFF		D - SUB INPUT
	ALL RESET	:	OFF		:	RGB
	NEXT PAGE				RGB SELECT
	SEL. MENU/ENTER OK		EXIT RETURN
					:	AUTO
					HD SELECT
					:	1080B
					INPUT SKIP
					:	OFF
					ALL RESET
					:	OFF
						1024768
					SEL. MENU/ENTER OK
						EXIT RETURN

OSM ORBITER settings

ON: The position of the menu will be shifted by eight dots each time OSM is displayed.

OFF: OSM will be displayed at the same position.

OSM CONTRAST settings NORMAL: OSM brightness is set to normal. LOW: OSM brightness is set to lower.

Setting the BNC input connector type

Select whether to set the input of the 5 BNC connectors to RGB or Component.

Example: Set the BNC INPUT mode to “COMP.”

On “BNC INPUT” of “OPTION1” menu, select “COMP.”.

	OPTION 1	1 / 4
OSM
BNC INPUT	:	COMP.
D - SUB INPUT	:	RGB
RGB SELECT

:AUTO

HD SELECT		:	1080B
INPUT SKIP		:	OFF
ALL RESET		:	OFF
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Information

BNC INPUT Settings

RGB: Use the 5BNC terminals for RGB input.

COMP.: Use the 3BNC terminals for component input.

Checking the signal being transmitted to RGB1 terminal

Use this to confirm the signal being transmitted to the RGB1 terminal.

It is set to RGB and can not be adjusted.

OPTION 1		1 / 4
OSM
BNC INPUT	:	RGB
D - SUB INPUT	:	RGB
RGB SELECT
: AUTO
HD SELECT	:	1080B
INPUT SKIP	:	OFF
ALL RESET	:	OFF
NEXT PAGE
CAN NOT ADJUST

Setting a computer image to the correct RGB select screen

With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast.

Example: Setting the “RGB SELECT” mode to “852480 ”

On “RGB SELECT” of “OPTION1” menu, select “852480”.

	OPTION 1		1 / 4
OSM
BNC INPUT		:	RGB
D - SUB INPUT		:	RGB
RGB SELECT
:	852 480
HD SELECT		:	1080B
INPUT SKIP		:	OFF
ALL RESET		:	OFF
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Information

RGB SELECT modes

AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page En-40.

The others: The available resolutions are shown. See page En-40 for the details of the above settings.

Downloaded From TV-Manual.com Manuals En-23