NEC PX-61XM4A Option4 Settings Menu, Displaying the entire image during Digital Zoom operations

REPEAT TIMER

Use this to set two timers. Each timer can use the DIVIDER, SOURCE and WORK TIME functions.

Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.

Example:

TIMER1...VIDEO1 will be displayed for 3 minutes. TIMER2...RGB1 will be displayed for 6 minutes in a

2⋅ 2 video wall.

On “REPEAT TIMER” of “VIDEO WALL” menu, select “ON”, then press the MENU/ENTER button.

The “REPEAT TIMER” screen appears. Adjust the items.

REPEAT TIMER

1	DIVIDER		:	1
	SOURCE		:	VIDEO1
	WORK TIME		:	00H03M
2	DIVIDER		:	4
	SOURCE		:	RGB1
	WORK TIME		:	00H06M
	SEL.	ADJ.		EXIT RETURN

Information

⬛REPEAT TIMER settings

DIVIDER: Divide the screen into 1, 4 or 9 sections.

SOURCE: Set the input mode to be displayed.

WORK TIME: Can be set to up to 4 hours 15 minutes in units of 1 minute.

If you set both timers, Timer 1 and Timer 2 run consecutively.

In the case of the Video wall, timer No.1 can be used to control all the displays simultaneously.

*This becomes effective when the on-screen menu goes out.

Option4 Settings Menu

Set “ADVANCED OSM” to “ON” in the MAIN MENU.

Removing the sub screen area when there is no input signal detected for the sub picture

This function automatically removes the black frame of the sub screen when there is no sub screen input signal. This feature is available only when the picuture-in-picuture mode is selected.

Example: Setting “DISPLAY” to “FADE”

On “SUB. PICTURE” of “OPTION4” menu, press the MENU/ENTER button.

The “SUB. PICTURE” screen appears. Adjust the items.

SUB . PICTURE

SUB . P DETECT		:	AUTO
DISPLAY		:	FADE
SUB . P RATE		:	100%
SEL.	ADJ.		EXIT RETURN

Information

⬛SUB. PICTURE Function

*Loss of the input signal means a condition in which the video signal and the sync signal are not present.

*Under conditions in which the sub screen has disappeared, the ZOOM NAV, PIC FREEZE, and SEAMLESS SW functions will not work. The WIDE button will not function either.

⬛SUB. P DETECT setting

AUTO: The black frame disappears 3 seconds after the input signal is lost.

OFF: Turns off the SUB. PICTURE function.

⬛DISPLAY setting

NORMAL: The sub screen is displayed consistently.

FADE: The sub screen fades in.

⬛SUB. P RATE setting

Set the transparency of the sub screen.

Displaying the entire image during DIGITAL ZOOM operations

Use this function to display the entire image within the sub screen together with an enlarged image on the main screen.

Example: Setting “ZOOM NAV” to “S BY S”

On “ZOOM NAV” of “OPTION4” menu, select “S BY S”.

	OPTION 4		4 / 4
PREVIOUS PAGE
SUB . PICTURE
ZOOM NAV		:	S BY S
PIC FREEZE		:	S BY S1
SEAMLESS SW		:	OFF
SELECT1		:	—
SELECT2		:	—
TEXT INSERT		:	OFF
SEL.	ADJ.		EXIT RETURN

Downloaded From TV-Manual.com Manuals En-34

Information

⬛ZOOM NAV Function

*This feature does not function during multi screen mode.

*This feature does not function while PIC FREEZE is operating.

*Providing a 2-screen display will cancel this function.

⬛ ZOOM NAV settings

OFF: Will not show the entire image on the sub screen.

S BY S: Will show the entire image on the sub screen of side-by-side mode.