Apple CP-X2521WN user manual Serial Settings, Control port, Baud Rate, Parity, Transmission Method

OPTION menu

Item		Description
		SERIAL SETTINGS
		Select the serial communication condition for the
		CONTROL port.
		BAUD RATE
		4800bps ￿ 9600bps ￿ 19200bps ￿ 38400bps
		PARITY
		NONE ￿ ODD ￿ EVEN
		• The BAUD RATE is fixed to 19200bps
		and PARITY is fixed NONE when the
		COMMUNICATION TYPE is set to OFF (￿59).
SERVICE	COMMUNICATION	TRANSMISSION METHOD
(continued)	(continued)	Select the transmission method for communication
		by the NETWORK BRIDGE from the CONTROL
		port.
		HALF-DUPLEX ￿ FULL-DUPLEX
		HALF-DUPLEX: This method lets the projector
		make two way communication, but only one
		direction, either transmitting or receiving data, is
		allowed at a time.
		FULL-DUPLEX: This method lets the projector
		make two way communication, transmitting and
		receiving data at the same time.
		• HALF-DUPLEX is selected as the default setting.
		• If you select HALF-DUPLEX, check the setting of
		the item RESPONSE LIMIT TIME (￿61).

(continued on next page)

60