SETUP menu
Item | Description |
|
|
|
|
| Using ▲/▼ buttons switches the standby mode setting between |
| NORMAL and SAVING. |
| NORMAL SAVING |
| When SAVING is selected, the power consumption in the standby |
| mode is lowered with some functional restriction as below: |
| • When SAVING is selected, the |
| except to turn the projector on and the network function are disabled |
STANDBY MODE | while the projector is in the standby mode. If the COMMUNICATION |
| TYPE in the COMMUNICATION menu is set to NETWORK |
| BRIDGE, all of the |
| • When SAVING is selected, AUDIO OUT STANDBY setting of |
| AUDIO SOURCE (46) is invalid, and no signal is output from |
| AUDIO OUT port in the standby mode. |
| • When SAVING is selected, STANDBY setting of MONITOR OUT |
| is invalid, and no signal is output from MONITOR OUT port in the |
| standby mode. |
| While the image signal from the input port chosen in step (1) is |
| projected, the image signal from the input port selected in step (2) is |
| output to MONITOR OUT port. |
| (1) Choose a picture input port using ▲/▼ buttons. |
| Choose STANDBY to select the picture |
| output in the standby mode. |
| (2) Select one of the COMPUTER IN ports |
| using ◄/► buttons. |
| Select OFF to disable the MONITOR OUT |
MONITOR OUT | port for the input port or standby mode |
| chosen in the step (1). |
| • You cannot select COMPUTER IN2 for COMPUTER IN1, and vice |
| versa. |
| • If you have changed the setting of STANDBY, it applies only to |
| the current standby mode, NORMAL or SAVING, selected under |
| STANDBY MODE, without changing the setting of the other mode. |
| The factory settings are as follows: |
| - COMPUTER IN1 for the NORMAL mode of STANDBY MODE |
| - OFF for the SAVING mode of STANDBY MODE |
45
