Presentation tools
USB Display (continued)
This application will appear in the Windows notification area once it starts. You can quit the application from your computer by selecting “Quit” on the menu.
NOTE • The “LiveViewer” (refer to the Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable
while the “LiveViewer” is running, the following message will be displayed.
•Depending on the software installed on your computer, images on your computer cannot be transferred using “LiveViewer Lite for USB”.
•If any application software having the firewall function is installed into your computer, make the firwall function invalid with following the user's manual.
•Some security software may block image transmission. Please change the security software setting to allow the use of "LiveViewer Lite for USB".
•When the audio input from USB TYPE B (
46) is selected, if the sound level is still low even after raising the volume level in the projector to the maximum, check whether your computer outputs audio and raise the volume level accordingly.
•If the computer in use is equipped with HDMI port, the audio setting will be changed and sound interruption or noise may occur when the HDMI cable is connected or disconnected during USB Display. Restart USB Display for this case.
•Image distortion or sound interruption may occur when “LiveViewer” is connected to LAN (wireless or wired) during USB Display. The above decline in performance is noticeable especially when multiple computers are connected to “LiveViewer”.
90
