Apple CP-X3021WN, CP-X2521WN, CP-X2021WN user manual Using the security bar and slot

Setting up

Fastening the adapter cover

Use the supplied adapter cover to prevent the USB wireless adapter from coming off easily.

1. Loosen the screw (marked with triangle) on the bottom right of the USB TYPE A port.

2. Insert the tab of the cover into the hole at the upper left of the USB

TYPE A port in the direction of the arrow.

3. Align the screw holes on the projector and the cover. Then insert the screw removed from the projector into the hole and tighten the screw.

1

3

2

Tab

WARNING ►Keep small parts away from children and pets. Take care not to put in the mouth.

Using the security bar and slot			Security slot
A commercially available anti-theft chain or
wire can be attached to the security bar on
the projector. Refer to the fi gure to choose		12mm
an anti-theft chain or wire.
Also this product has the security slot for
			18mm
the Kensington lock.			18mm
For details, see the manual of the security
tool.	12 mm

		Anti-theft	security bar
	18 mm	chain or wire
18 mm	Installation surface
	10 mm

WARNING ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it.

CAUTION ►Do not place anti-theft chain or wire near the exhaust vents. It may become too hot.

NOTE • The security bar and slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure.

16