![](/images/new-backgrounds/1186580/186580105x1.webp)
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
Item
Description
| Using the ▲/▼ buttons turns on/off the automatic signal search |
| function. |
| ON OFF |
| When the ON is selected, detecting no signal automatically cycles |
AUTO SEARCH | through input ports in the following order. The search is started from |
the current port. Then when an input is found, the projector will stop | |
| searching and display the image. |
| COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A |
| VIDEO |
| • It may take several seconds to project the images from the |
| USB TYPE B port. |
| Using the ▲/▼ buttons turns on/off the automatic keystone function. |
| ON OFF |
| ON : Automatic keystone distortion correction will be executed |
| whenever changing the slant of the projector. |
AUTO | OFF : This function is disabled. Please execute the AUTO |
KEYSTONE | KEYSTONE (EXECUTE) in the SETUP menu for automatic |
| keystone distortion correction. |
| • When the projector is suspended from the ceiling this feature will |
| not function properly so select the OFF. |
| • This function will be unavailable when the Transition Detector is on |
| (77). |
| Using the ▲/▼ buttons turns on/off the DIRECT POWER ON |
| function. |
| ON OFF |
| When set to the ON, the lamp in projector will be automatically turned |
DIRECT POWER | on without the usual procedure (19), only when the projector is |
supplied with the power after the power was cut while the lamp was on. | |
ON | • This function does not work as long as the power has been |
| supplied to the projector while the lamp is off. |
•After turning the lamp on by the DIRECT POWER ON function, if neither input nor operation is detected for about 30 minutes, the
projector is turned off, even though the AUTO POWER OFF function (54) is disabled.
(continued on next page)
53