Setting up
Connecting to a power supply
1. Put the connector of the power cord into the AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON function activated (
53), the connection of the power supply make the projector turn on.
AC IN 
Power cord 
WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
•Do not touch the power cord with a wet hand.
•Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one. Never modify the power cord.
•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Do not distribute the power supply to multiple devices. Doing so may overload the outlet and connectors, loosen the connection, or result in fire, electric shock or other accidents.
•Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using an appropriate power cord (bundled).
NOTICE ►This product is also designed for IT power systems with a
15
