Apple CP-X2021WN, CP-X2521WN Network Guide, Communication Type, Commands Network Bridge Function

OPTION menu

Item Description

Selecting this item displays COMMUNICATION menu.

In this menu, you can configure the serial communication settings of the projector using the CONTROL port.

		• Select an item using the cursor buttons ▲/▼.
		Then pressing the ► button opens the submenu
		for the setting item you selected. Or, pressing
		the ◄ button instead of the ► button makes the
		menu back to the previous one without changing
		the setup. Each submenu can be operated as
		described above.
		• When COMMUNICATION TYPE (￿below) is
		set to OFF, the other items in COMMUNICATION
		menu are invalid.
		• For the function of serial communication, refer to
SERVICE		the Network Guide.
	COMMUNICATION	COMMUNICATION TYPE
(continued)
		Select the communication type for transmission via
		the CONTROL port.
		NETWORK BRIDGE (WIRELESS)
		￿
		NETWORK BRIDGE (WIRED)
		￿
		OFF
		NETWORK BRIDGE: Select this type, if it is
		required to control an external device as a
		network terminal, via this projector from the
		computer. Select WIRELESS or WIRED as your
		network connection mode.
		The CONTROL port doesn't accept RS-232C
		commands (Network Bridge Function in the
		Network Guide)
		OFF: Select this mode to receive RS-232C
		commands using the CONTROL port.
		• OFF is selected as the default setting.
		• When you select the NETWORK BRIDGE, check
		the item, TRANSMISSION METHOD (￿60).

(continued on next page)

59