NEC PX-61XM4A, PX-50XM5A Setting the screen size for S1/S2 video input, Setting CloseCaption

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO.

This feature is available only when an S-video signal is input via the VIDEO3 terminal.

Example: Setting “S1/S2” to “AUTO”

On “S1/S2” of “OPTION2” menu, select “AUTO”.

	OPTION 2		2 / 4
PREVIOUS PAGE
PWR . MGT.		:	OFF
CINEMA MODE		:	ON
LONG LIFE
GRAY LEVEL		:	3
S1/S2		:	AUTO
PICTURE SIZE		:	ON
DVI SET UP
CLOSECAPTION		:	OFF
CAPTION CONT.		:	LOW
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Information

⬛S1/S2 settings

AUTO: Adjusts the screen size automatically according to the S1/S2 video signal.

OFF: Turns the S1/S2 function off.

Setting the picture size for RGB input signals

Use this procedure to switch the setting to “ON” or “OFF”. * This function is available only for 50 and 61 inch types.

Example: Setting the “PICTURE SIZE” mode to “OFF”

On “PICTURE SIZE” of “OPTION2” menu, select “OFF”.

	OPTION 2		2 / 4
PREVIOUS PAGE
PWR . MGT.		:	OFF
CINEMA MODE		:	ON
LONG LIFE
GRAY LEVEL		:	3
S1/S2		:	OFF
PICTURE SIZE		:	OFF
DVI SET UP
CLOSECAPTION		:	OFF
CAPTION CONT.		:	LOW
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Setting the signal and black level for DVI signal

Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.

Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”

On “OPTION2” menu, select “DVI SET UP”, then press the MENU/ENTER button.

The “DVI SET UP” screen appears.

On “PLUG/PLAY” of “DVI SET UP” menu, select “STB/ DVD”.

DVI SET UP

PLUG/PLAY		:	STB/DVD
BLACK LEVEL		:	HIGH
SEL.	ADJ.		EXIT RETURN

Information

⬛PLUG/PLAY settings

PC: When connected to the PC signal.

BLACK LEVEL is set to “LOW” automatically. STB/DVD: When connected to the SET TOP BOX, DVD etc. BLACK LEVEL is set to “HIGH” automatically.

⬛BLACK LEVEL settings

LOW: When connected to the PC signal.

HIGH: When connected to the SET TOP BOX, DVD etc. Change “HIGH” into “LOW” if the black level appears gray.

Setting CloseCaption

Choose the closed caption mode that allows text to be superimposed in the active video.

Example: Setting “CLOSECAPTION” to “CC2”

On “CLOSECAPTION” of “OPTION2” menu, select “CC2”.

	OPTION 2		2 / 4
PREVIOUS PAGE
PWR . MGT.		:	OFF
CINEMA MODE		:	ON
LONG LIFE
GRAY LEVEL		:	3
S1/S2		:	OFF
PICTURE SIZE		:	ON
DVI SET UP
CLOSECAPTION		:	CC2
CAPTION CONT.		:	LOW
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Information

⬛CLOSECAPTION settings

OFF: This exits the closed caption mode.

CC1~4: Text is superimposed.

TEXT1~4: Text is displayed in full screen.

A closed caption signal may not be decoded in the following signature;

1.when a video tape has been dubbed.

2.when the signal reception is weak.

3.when the signal reception is nonstandard.

When using closed captioned channel or the text mode, the text screen always appears.

When there is no signal, however, the text screen will not display text characters.

Setting the contrast of CloseCaption

Choose the brightness of the closed caption.

Example: Setting “CAPTION CONT.” to “NORMAL”

On “CAPTION CONT.” of “OPTION2” menu, select “NORMAL”.

	OPTION 2		2 / 4
PREVIOUS PAGE
PWR . MGT.		:	OFF
CINEMA MODE		:	ON
LONG LIFE
GRAY LEVEL		:	3
S1/S2		:	OFF
PICTURE SIZE		:	ON
DVI SET UP
CLOSECAPTION		:	OFF
CAPTION CONT.		:	NORMAL
NEXT PAGE
SEL.	ADJ.		EXIT RETURN

Information

⬛CAPTION CONT. settings

NORMAL: Closed Caption brightness is set to normal.

LOW: Closed Caption brightness is set to lower.

Downloaded From TV-Manual.com Manuals En-28