TheaterSync Video Processor User Manual |
For projection applications where keystone correction is required, continue with the following steps:
6.If the projector has an AUTOSET or AUTODETECT feature, disable this function. These projector modes may cause image distortion if a
7.Select the “Advanced” menu from the TheaterSync OSM, then select “Projection”, and “Horizontal and Vertical Keystone” submenus.
8.Using the up/down arrow keys, select in turn each of the image corner sliders and then use the left/right arrow keys to move the corner to the desired location on the screen. Continue adjustments until the projected image matches the target screen geometry.
NEC Solutions, Inc. | Page 15 |
