Manuals / NEC / Communications / IP Phone

NEC UX5000 Installing And Using a Headset, To install an optional headset, To use your headset

Models: UX5000

1 24

Download 24 pages 41.25 Kb

Page 16

Installing And Using a Headset

To install an optional headset:

1.Plug the headset cord into the headset jack on the bottom of the terminal.

2.The headset cord routes through the upper channel on the right side of the terminal base.

To program a Headset Key:

1.CALL1 + Dial 851 + Press Function Key + Headset code 05 + SPK.

–You will hear a confirmation beep and see visual Headset confirmation on your display.

To use your headset:

Option: A Headset Service Code can be defined by your

Communications Manager which will allow the headset mode to be automatically used for all calls.

1.Press your programmed Headset Function Key.

–The headset key lights when you’re on a call.

To disconnect, press the Headset key again. You can still use the handset for calls or respond to voice-announced Intercom calls with the headset plugged in. The headset only activates when the Headset key is pressed.

Note: When the user is set up for ringing through the headset, the handset should not be used. It is recommended to only use the headset in this case.

16

Image 16

NEC UX5000 Installing And Using a Headset, To install an optional headset, To program a Headset Key, To use your headset

Contents

Multibutton Terminal User Guide Installing the Handset And Line Cord Adjusting the Five-Position Viewing AngleHow To Use This Guide Removing and Reinstalling the FaceplateWhen using the instructions in this user guide, you Secure Mode and Display Alphanumeric DisplayUsing The Function Keys Using The Soft KeysUnderstanding the Ring/Message Lamp Setting Up Your Abbreviated Dial Bin Keys Abbreviated Dial Bin KeysUsing The Fixed Function Keys DialOutside Calls To answer an outside callTo place an outside call To return a call in your Caller ID logIntercom Calls To And From Co-Workers Place a Call On Hold To place your call on System Regular HoldTo place your outside call on Exclusive Hold To pick up an outside call on HoldSet Up a Conference Telephone Meeting To set up a conference/meetingTransfer a Call To a Co-worker To Transfer your call to a co-workerTo cancel Call Forward Forward reroute Your CallsMessage Waiting MenuTo answer a Message Waiting left for you Off Hook Ring, Back Light and HeadsetDialing By Name Directory Dialing Change Your Ring TonesTo change your extension’s incoming ring tones To listen to the incoming ring choicesUsing a DSS Console Special Features For AttendantsInstalling And Using a Headset To install an optional headsetTo program a Headset Key To use your headsetUsing the Headset with Automatic Answer for ACD Agents Programming Your Extension’s Name To program your extension’s nameAdditional Quick Reference For Other Features To pick up CALL1 + ** + Announced extensionTo log into your mailbox from your own terminal Calling Logging Into Your MailboxTo log into your mailbox from a co-worker’s terminal Voice Mailbox Basics To record a greeting for your mailboxTo record a name for your mailbox To enter a security code for your mailboxTo record and send a message to a co-worker More Mailbox FeaturesTo listen to your messages Push More+ Optns + ATime Push More+ Optns+ NotifTo use the System Administrator options Voice Mail Administrator OptionsPush More+ Admin