Bosch Appliances F220-B6RS Install the Detector Heads, Mount the Detector Heads

20 en Install the Detector Heads F220 Series Detectors with F220-B6RS Bases

4 Install the Detector Heads

4.1Mount the Detector Heads

CAUTION! Before mounting detector heads, all terminal

	!	screws in the base including those not wired must be
		tightened to prevent loose screw heads from making
i		intermitent electrical contact with the detector head.

NOTE! When using F220-B6RS Sounder Bases, set the

i DIP switches for desired operation and sounder signal pattern before installing the detector heads.

4.1.1Optional Locking Bar

Each base has a snap-off locking bar as part of the base molding. Engage the locking bar to prohibit unauthorized detector removal. To engage the locking bar, move it to the position shown in Figure 4.1.

1 2

X X

1.Snap locking bar (X) off base molding

2.Insert locking bar (X) into locking bar mount until fully engaged

Fig. 4.1 Engaging the Locking Bar

F.01U.029.847 -01 2007.02 Installation Manual Bosch Security Systems, Inc.