2 en Legal | F220 Series Detectors with |
|
|
1 Legal
1.1Trademarks
CleanMe® is a registered trademark of GE Interlogix in the United States and/or other countries.
Chamber Check® is a registered trademark of Bosch Security Systems, Inc. in the United States.
Chambermaid™ is a trademark of Bosch Security Systems, Inc. in the United States.
TECHSPRAY® is a registered trademark of Tech Spray L.P.
1.2Required Maintenance and Testing
Keep the detector calibrated for proper operation. NFPA 72, The National Fire Alarm Code, recommends performing calibration tests at installation, then every other year. Depending on local regulations, calibration testing might be required more than once a year.
Perform functional testing yearly.
NOTE! Notify all concerned parties before any
i maintenance or testing of the fire alarm system and upon completion of these activities.
Test the calibration (to meet NFPA 72) using either the magnet test or measuring the calibration with a calibrated product from No Climb Products Ltd. Quickly determine the calibration by a visual inspection of the detector’s LED (refer to Section 4.4 Flash Rate and Trouble Indication on page 24). These tests confirm whether or not the detector is within its factory marked calibration range.
At least once a year vacuum or wipe the external part of the detector clean. Pay particular attention to the detector screens in areas of heavy insect activity or dust. To clean the chamber,
F.01U.029.847 | Installation Manual | Bosch Security Systems, Inc. |
