NEC VT57, VT58, VT480 manual Installation and Connections, Reflecting the Image

2. Installation and Connections

WARNING

*Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information.

*Do not attempt to install the projector yourself.

•Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged.

•Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41˚F (5˚C) and 104˚F (40˚C) (Eco mode selected automatically at 95˚F to 104˚F/35˚C to 40˚C).

•Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.

•Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector.

Reflecting the Image

Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you're using a mirror system and your image is inverted, use the MENU and SELECT buttons on your projector cabinet or your remote control to correct the orientation. (→ page 44)

12